Name: XPON ONU 1GE+SFP BRIDGE MÓDULO OPTICAL NETWORK UNIT SFP
Brand: VSOL
SKU: V2801F

Medios de pago

10% de descuento pagando con Transferencia o depósito

Medios de envío

Hardware Parameter

Dimension: 14.1mm×79mm×13.6mm(H×W×D)
Net weight: 35g
Operating condition:
Temperature: 0℃～50℃
Humidity: 10%～90% (non-condensing)
Storing condition:
Temperature : -30℃～60℃
Humidity : 10%～90% (non-condensing)
Power supply: DC3.3V
Power consumption: ≤4W

Interface Parameter

PON interface:
1 SC/UPC connector, PX20+ and Class B+
Receiving sensitivity: ≤-28dBm
Transmitting optical power: 0～+4dBm
Transmission distance: 20KM
Wavelength: Tx-1310nm, Rx-1490nm
Optical interface: SC/UPC connector
LAN interface: 1xGE Ethernet interfaces, SFP connector

Function Data

Satisfactory standard:
Meet IEEE802.3ah standard
Meet ITU-T G.984.x
Meet China's CTC3.0 standards
SFU ONU:
Bridging mode
Well connect with mainstream OLT
L2:
802.1D&802.1ad bridging
802.1p CoS
L3:
IPv4
Forwarding PPPoE package
Multicast: Forwarding IGMPv2/v3 package

Pin Description

PIN	Name	Description	Notes
1	VeeT	Transmitter Ground	1
2	Tx-Fault	Transmitter Fault Indication, Normal “0”,Fault：Logic “1” output , LVTTL	2
3	Tx-Disable	TX Disable; turns off Tx laser	3
4	Mod-Def(2)	SDA I2C Data line	2
5	Mod-Def(1)	SCL I2C Clock line	2
6	Mod-Def(0)	Module Absent, connected to VeeR	2
7	Rate Select	For Dying Gasp detect, input low active
8	LOS	Loss of Signal	2
9	VeeR	Receiver Ground	1
10	VeeR	Receiver Ground	1
11	VeeR	Receiver Ground	1
12	RD-	Inv. Received Data Output
13	RD+	Received Data Output
14	VeeR	Receiver Ground	1
15	VccR	Receiver Power	1
16	VccT	Transmitter Power
17	VeeT	Transmitter Ground	1
18	TD+	Transmit Data In
19	TD-	Inv.Transmit Data In
20	VeeT	Transmitter Ground	1

Notes:
1. Module circuit ground is isolated from module chassis ground within the module.
2. The pins shall be pulled up with 4.7K-10KΩ to a voltage between 3.13V and 3.47V on host board.
3. The pin is pulled up to VccT with a 4.7K-10KΩ resistor in the module.

PRODUCTOS SIMILARES